1966 F100 LS Swap Wiring
LS swap-wiring the harness Getting to this point took some real effort. It looks real scary but had some great help from the following LT1swap.com and YouCandoit2 and Ugly Truck Experience Getting all the wires labeled is the key. Note: you will have to use a heat gun or your wife's hair dryer to remove the transmission wiring plug as it is glued in from the factory. also needs heated to re-install Here we are all removed and ready for the de-pinning [removal of unwanted wires] The trick is to leave all the connectors on and follow lt1swap.com online color guide and 4 part Youtube series on this Wire loom and tape removed from the harness. The wiring getting pulled out of the two PCM plugs and rolled up for removal or relocation. A large table or two are great to spread things out. I have videos from lt1swap.com and Youcandoit2 playing over and over, and over cross referenc...